| GR100HD | Max. gripping width | Min. opening | Max. lifting capacity | Height. open | Height. closed | Working pressure | Jaw material | Weight | Recommended Rotator: |
|---|---|---|---|---|---|---|---|---|---|
| 98 3/4" | 5 7/8" | 22,000 lbs | 41 3/4" | 32" | 4351psi | Hardox | 1504 lbs |
The Valby GR 100HD is a grapple for handling of large stems. It is made of high
quality Hardox steel. Every joint has a bronze bearing and a grease fitting. The
grapple is well protected from the bottom with a belly plate.
Modern bypass grapple design.
All Valby grapples have a bronze bushing at every joint, and every
joint has a grease fitting.
Large, powerful cylinder.
Double connection rods provide good balance and less stress.
A belly plate protects the cylinder from underneath.
The Valby bypass grapples have excellent geometry. The form of the
claws enables a smooth roll in of the stems. The grapples also close to a
tight minimum opening.
This model may need to be special ordered.
GR100HD GRAPPLE
Copyright © 2016 Northeast Implement
Address:
Northeast Implement
460 Halsey Valley Road, Spencer NY 14883
Contact:
Phone: (607)-589-6160
Fax: (607)-589-4026
Email: info@northeastimplement.com
Northeast Implement
