The R3 is a continuous
rotation rotator where the oil to
open and close the grapple is run
through the rotator to the outlets
on the axle. The rotator has a
grease fitting for hookup pin of
the hanger. The hose guard
protects the hoses from damage.
Rotation:
Unlimited in either direction
Max Load:
6600 lb.
Max Working Pressure:
3000 psi
Torque:
516 ft. lb./2320 psi
Weight:
41 lb.
Has pin to fit grapple hanger with hole of:
1"
The hook up dimensions of the R3 allow it to replace GV3 and FR7, as they are the same.
The rotators come with JIC fittings. Hook up is easy, as symbols on the rotator describe the
functions of each outlet. From left to right: opening of jaws, rotating functions, and closing of the
jaws.
| Type | A) Width of block on top of the rotator |
B) Pinhole diameter through rotator |
C) Axle diameter |
D) Pinhole diameter to fasten grapple to rotator |
E) |
Thread |
|---|---|---|---|---|---|---|
| R3 | 2.362” (60 mm) | 0.984" (25 mm) |
1.948" (49.5 mm) |
0.984" (25 mm) | 9.37" (238 mm) |
JIC ¾” 16 |
R3 ROTATOR
Copyright © 2016 Northeast Implement
Address:
Northeast Implement
460 Halsey Valley Road, Spencer NY 14883
Contact:
Phone: (607)-589-6160
Fax: (607)-589-4026
Email: info@northeastimplement.com
Northeast Implement
